What problems often occur when using stainless steel screws?

cross recessed screws are used in large quantities in our daily life, but the common problems and their solutions in daily use are not widely known, such as common problems such as anti-loose, rust, and breakage. Once these problems occur, replace the screws if they are small. , The larger ones cause destructive damage to the equipment components, so how to avoid these problems, the following is a list of these common problems and their prevention methods.

Anti-loosening problem of stainless steel screws

Simply speaking, it is necessary to use cross recessed screwson product materials so that the cross recessed screws will not fall off lightly. The screws and the product materials need to be connected more tightly. For the solution of preventing loosening of stainless steel screws, there are the following two solutions:

 Use special materials for the resilience, such as engineering resin materials, which have better resilience. Attach it to the stainless steel screw thread. Make it mechanically rub against the nut or the material product. Produce vibration and resistance. Solve the problem of loose screws.

 Apply a layer of glue on the threads of stainless steel screws, the so-called glue. This glue is called anti-fall glue. This glue has good properties such as high stickiness. This glue is applied to stainless steel screws, and after drying, it has strong adhesion. The stainless steel screw thread can be combined with the nut thread, or after the threaded hole of the product is joined, a super-caused tightening effect can be produced. Play a good anti-loose effect.

Second, the rust problem of stainless steel screws

The attachment of dust or foreign metal particles, in the humid air, the attachment and the condensed water of the stainless steel screw connect the two to form a micro battery, which triggers an electrochemical reaction and damages the protective film, which is called electricity Chemical corrosion.

The surface of the stainless steel screw adheres to the organic juice (such as melon, vegetable, noodle soup, sputum, etc.), which forms organic acid in the presence of water and oxygen, and the organic acid will corrode the metal surface for a long time.

The surface of cross recessed screwscontains acid, alkali, and salt substances (such as alkaline water and lime water splashing on the decoration wall), causing local corrosion.

In polluted air (such as the atmosphere containing a large amount of sulfide, carbon oxide, and nitrogen oxide), it will form sulfuric acid, nitric acid, and acetic acid liquid spots when encountering condensed water, causing chemical corrosion.

Recommended Products

  • brass Coarse Thread Mushroom Head Square Neck Carriage Bolt Grade 8.8 DIN603,M16

    Diameter range (mm):M5-M24,3/16-1'Length range (mm):16-600,1''-2'
  • countersunk hand with nib bolts Zinc Plated nonstandard bolt

  • cup head square neck bolts with small head and Yellow neck

  • Yellow Zinc Plated,Truss Head Philips Machine Screws,Grade 6.8

    Diameter range (mm):M5-M20,3/16-1"Length range (mm):5-300,3/16-12"
  • brass Cross Recessed Raised Truss Head Mini Machine Screws,Grade 4.8 6.8 8.8

    Diameter range (mm):M5-M20,3/16-1"Length range (mm):5-300,3/16-12"
  • Din963 Slotted Countersunk Head Machine Screws ,Grade 4.8 , Yellow Zinc Plated M2 M3 M4 M5 M6 M8 M10 M12

  • Din965 Cross Recessed Raised Flat Head Machine Screws ,Grade 4.8 ,Black Zinc Plated M2 M3 M4 M5 M6 M8 M10 M12

  • Zinc Plated, Large half round head tiny brass screws,Grade 4.8,

  • Zinc Plated,Longer Full Thread Cross Slot Round Pan Head Machine Screws,Din7985,M4 M5

  • Non-standard round head bolts with hole

    Size: M2.5 to M24 Length: Up to 300mm Standard: Non Standard, we can manufacture as customer's dra...
  • T shape bolts for slot

    Size: M2.5 to M24 Length: Up to 300mm Standard: Non Standard, we can manufacture as customer's draw...
  • Non-standard High-quality raw material T shape bolts for slot

    Size: M2.5 to M24 Length: Up to 300mm Standard: Non Standard, we can manufacture as customer's draw...