The difference between pan head screws and round head screws

1. The intuitive difference between stainless steel pan head screws and round head screws is that the shape is different. Of course, it mainly refers to the head type of the screw. The head of the round head screw is round and the side looks semi-circular, while the head of the pan head screw is round and the side looks trapezoidal.
2. The difference in the amount of material used: Pan head screws and round head screws of the same specification, round head screws are larger than pan head screws in terms of volume, weight, and surface area.
3. In terms of application range, in fact, there is no difference in the application range of stainless steel pan head screws and round head screws. They have the characteristics of decisiveness, non-magnetic, corrosion-like, and beautiful appearance. Electronic industry, office equipment, mechanical equipment, etc.
If the connected parts require high corrosion resistance, use stainless steel pan head screws or round head screws. If the torque is required to be large, and it is afraid of being twisted, it is more suitable to use carbon steel to harden the material. Haiyan Xinglong Fastener Co., Ltd. can customize screws with different head types and groove types according to customer needs. If necessary, you are welcome to inquire!

Recommended Products

  • Non-standard High-quality raw material T shape bolts for slot

    Size: M2.5 to M24 Length: Up to 300mm Standard: Non Standard, we can manufacture as customer's draw...
  • zinc plated,cross recessed raised truss head machine screws,grade 4.8 6.8 8.8

    Diameter range (mm):M5-M20,3/16-1"Length range (mm):5-300,3/16-12"
  • Zinc Plated,Longer Full Thread Cross Slot Round Pan Head Machine Screws,Din7985,M4 M5

  • Flat countersunk head elevator bolts

  • truss head Machine Screws with hexalobular driving

    Diameter range (mm):M2-M20,1/8-3/4Length range (mm):3-300,1/2-12'
  • Yellow Zinc Plated,Pozi Pan Head Machine Screws,Grade 4.8,Din7985

  • Yellow Zinc Plated,Longer Carbon Steel Full Thread Mushroom Head Carriage Bolt Grade 4.8 DIN603,M 6 /8

    Diameter range (mm):M5-M24,3/16-1'Length range (mm):16-600,1''-2'
  • Din965 Cross Recessed Raised Countersunk Head Machine Screws ,Grade 4.8 , Zinc Plated M2 M3 M4 M5 M6 M8 M10 M12

  • High Strength Slotted Round Head Yellow Zinc Plated

  • Zinc Plated,Roofing Bolt With Square Nut,Grade 8.8

    Diameter range (mm):M5-M20,3/16-1"Length range (mm):5-300,3/16-12"
  • Din965 Cross Recessed Raised Flat Head Machine Screws ,Grade 4.8 ,Yellow Zinc Plated M2 M3 M4 M5 M6 M8 M10 M12

  • Non-standard flat head with square neck bolts

    Size: M2.5 to M24 Length: Up to 300mm Standard: Non Standard, we can manufacture as customer's draw...